You already know that RCC Turbo Kits are some of the finest turbo kits made in the world today, and the RCC Hayabusa Street/Strip Turbo Kit, capable of 550 hp on race fuel, is no exception. The RCC Hayabusa Street strip Turbo Kit 550 Hp is essentially The RCC Hayabusa Race Turbo Kit, but uses a 2 inch up pipe that goes through the ram air to pull. For those of you who do not want to cut the frame crossmember for the uptight nor do you need to relocate your cooling fan with this kit. If you want a 550 hp turbo kit and don't want to set your bike up as a full race bike, then this is the kit for you. With this RCC Hayabusa Street/Strip Turbo Kit you have everything you need in a turbo system to hit the street with 550 hp on race fuel. With this RCC Street/Strip Turbo Kit you get a custom Garrett GT GT35-R, capable of producing 550 hp. To control the boost levels this RCC Race Turbo Kit comes with a 44 mm of V-Band Tial Wastegate and to release unneeded pressure this kit is equipped with a 50 mm Tial blow off valve. Bolting up the custom 304 stainless steel header and flanges from RCC Turbos to handle the exhaust gases, before dumping through the 3 inch stainless steel race dump pipe. Air flows through with 2 inch up-pipe with V-band clamps and O-rings into a billet polished intake plenum. This kit employees ECU Editor, 3 Bar MAP Sensor, Billet Primary Fuel Rail and Larger injectors. To control intake temperatures, we recommend an aqua mist water injection system. This RCC race turbo kit for the Suzuki Hayabusa, also comes with all the mounting hardware, fittings and engine components needed for this turbo install.
2008-2014 550HP Hayabusa Street/Strip kitGarret GT 35-R44 mm V-band tial wastegate50 mm tial blow off valve3" stainless steel race dump pipe304 grade stainless steel header and flangesbraided oil feed line and fittingsoil return line and fittingsnew in-line fuel pumpfuel pressure regulatorfuel lines for the fuel systempolished air box ECU Editor wires and BIN file providedoil block off platescrankcase vent filterBillet primary fuel rail with larger injectors3 bar map sensorK&N air filterall vacuum lines, connectors, hose clamps, and fittingsall hoses, vacuum lines and wires are prelabeled for easy installationInstallation instructions are provided on CD
Options:
To order any of the options below you will need to go to the "Turbo Kit Options" section and order the parts from that page.------Water injection system (allows more boost for pump fuel)--$900 USD
------Onboard datalogging and wideband O2----------------------- $1000 USD------Second cooling fan and mounting hardware------------------ $150 USDThis system will make 550 HP on race fuel and is designed for the person who is not planning on building an all out race bike. It is similar to the Race kit, but uses a 2" up-pipe that goes through the ram air tube hole. You do not have to cut a frame crossmember for the up-pipe nor do you need to relocate your cooling fan.all workmanship comes with a 2 year warranty ----ie. cracking pipes or fittingsturbo unit comes with a 2 year warrantyfuel pump and regulator come with a 2 year warranty
If you want the best street/strip kit money can buy, then look no further than the RCC Hayabusa Race Turbo Kit, capable of producing 550 hp on race fuel.
We also carry a full line of engine components, such as connecting rods Pistons and clutch components, so you can build a motor capable of handling the horsepower this turbo kit produces.
Due to the numerous options offered on the RCC turbo kits, each kit is custom-made per order. Please allow 3 to 4 weeks for shipping and processing.